One piece design, connects horizontal or ledger tubes to standards. To be used in every position where the tube it secures comes under load. Fits 1 1/2” or 1 1/4” tube. Weight 3.4lbs

Single unit design, principally used for bracing and allowing tubes to be connected at any angle. Fits 1 1/2” or 1 1/4” tube. Weight 3.75lbs

Single unit design, allows tube to be bolted or welded to another structure. Weight 1.8lbs

Single unit design, used for connecting transoms to ledger tubes, and for securing guard rails to standards. Available for 1 1/2”(CUI1201) or 1 1/4” tube (CUI1202). Weight 1.4lbs

A fitting designed (using specially heated pressed steel) for external joining of two tubes end to end. Recommended for use on ledger and bracing members. Weight 2.4lbs

Designed for joining tubes end to end. It is an internal expanding type, operating against the inner walls of the tubes. Only to be used vertically. Weight 2.55lbs

Two piece welded construction, designed to connect scaffold tube directly to steel beams (up to 1 3/4" thick). Must be used in pairs. Weight 3.3lbs

Designed to connect scaffold tube directly to steel beams at any angle (up to 1 3/4" thick). Must always be used in pairs, can be used at any angle. Weight 3.4lbs

One piece design, connects horizontal or ledger tubes to standards. To be used in every position where the tube it secures comes under load. Available in multiple sizes, 3” x 1.9”(CUI1034/5), 3 1/2” x 1.9”(CUI1036/7), 2 3/8” x 1.9”(CUI1038/9)

A fitting to lap two tubes in parallel, the bolt fixing it firmly securing the tubes together in direct contact. Weight 2.45lbs

To connect top bearers on platform to leave top of tube flush for timber joists. Can also be used to connect timber to scaffolding. Weight 1.8lbs

Specialized clamp, to be attached directly to cross bracing. Allows regular cross brace to be attached to scaffold pipe. Available in silver with wing nut (CUI1421) or gold with hex nut (CUI1424) Weight 1.1lbs

The Screw Jack with Base Plate is made of steel, and is primarily used when setting scaffold up on even surfaces. This screw jack easily adjusts up & down to desired height. Available for modular, tubular and frame systems. Weight 12.05lbs

The Screw Jack with Base Plate is made of steel, and is primarily used when setting scaffold up on even surfaces. This screw jack easily adjusts up & down to desired height. Available for modular and tubular systems. Weight 7.45lbs

The Screw Jack with Base Plate is made of steel, and is primarily used when setting scaffold up on uneven surfaces. This screw jack easily adjusts up & down to desired height. Available for modular, tubular and frame systems. Weight 9.55lbs

Used for connecting hanging chain to scaffold pipe on pipe grids. Available in 1 1/2" or 1 1/4", in black or silver. Silver 1 1/2"(CUI1505) Weight 0.82lbs, Black 1 1/2" (CUI1506) Weight 0.82lbs, Silver 1 1/4" (CUI1507) Weight 0.82lbs, Black 1 1/4" (CUI1508) Weight 0.82lbs.

Used for connecting hanging chain to scaffold pipe on pipe grids. Available in 1 1/2" or 1 1/4", in black or silver. Silver 1 1/2"(CUI1501) Weight 0.82lbs, Black 1 1/2" (CUI1502) Weight 0.82lbs, Silver 1 1/4" (CUI1503) Weight 0.82lbs, Black 1 1/4" (CUI1504) Weight 0.82lbs.

Used to connect tube end to end and secured by 4 grub screws. Black matte powder coated finish. Fits 1 1/2” or 1 1/4” tube. 1 1/4" (CUI1102) Weight 1.95lbs, 1 1/2" (CUI1104) Weight 3.1lbs.

Used to connect bracing tube to walls, floors or ceilings. Fits 1 1/2” and 1 1/4" tube size. Weight 3.4 lbs

Half coupler complete with Eye Ring. Weight 2.25 lbs

Punched hole cross braces in various sizes.
CUI1309 65” Cross Brace (5’ x 2’)
CUI1311 99” Cross Brace ( 8’ x 2’)
CUI1312 102” Cross Brace (8’ x 3’)
CUI1313 108” Cross Brace (8’ x 4’)
CUI1314 120” Cross Brace (10’ x 1’)
Weights 65” 7.6LBS 99” 11.45LBS, 102 12.20 LBS, 108 13.4 LBS, 120 14.35LBS